Rockwell Automation 1794-APB/B FLEX I/O PROFIBUS Adapter Module User Manual - Manual (Page 49)

2–29 How Communication Takes Place and I/O Image Table Mapping
Publication 1794ĆUM057B-EN-P - November 2001
Description
Decimal Bit
(Octal Bit)
Word
Write Word 1 00-01 (00-01) Module Data Type
Bit 01 00 Definition
0 0 o C (default)
0 1 o F
1 0 Bipolar counts scaled between -32768 and +32767
1 1 Unipolar counts scaled between 0 and 65535
Bit 02 (02) Fixed Digital Filter - When this bit is set (1), a software digital filter is enabled. This filter settles to
100% of a Full Scale step input in 60 scans.
03-05 (03-05) A/D Filter First Notch Frequency
Bit 05 04 03 Definition
0 0 0 10Hz (default)
0 0 1 25Hz
0 1 0 50Hz
0 1 1 60Hz
1 0 0 100Hz
1 0 1 250Hz
1 1 0 500Hz
1 1 1 1000hZ
06 (06) Calibration High/Low bit - This bit is set during gain calibration; reset during offset calibration.
07 (07) Calibration clock- this bit must be set to 1 to prepare for a calibration cycle; then reset to 0 to initiate
calibration.
08-15 (10-17) Calibration mask- The channel, or channels, to be calibrated will have the correct mask bit set. Bit 8
corresponds to channel 0, bit 9 to channel 1, and so on.