Rockwell Automation 1794-APB/B FLEX I/O PROFIBUS Adapter Module User Manual - Manual (Page 2)

Microsoft is a registered trademark of the Microsoft Corporation.
Windows is a trademark of the Microsoft Corporation.
FLEX I/O and PLC-5 are trademarks of the Allen-Bradley Company, Inc.
PROFIBUS is a trademark of the PROFIBUS User Organization
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of this
equipment must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards.
In no event will the Allen-Bradley Company be responsible or liable
for indirect or consequential damages resulting from the use or
application of this equipment.
The examples and diagrams in this manual are included solely for
illustrative purposes. Because of the many variables and
requirements associated with any particular installation, the
Allen-Bradley Company cannot assume responsibility or liability for
actual use based on the examples and diagrams.
Allen-Bradley publication SGI-1.1, “Safety Guidelines for the
Application, Installation and Maintenance of Solid State Controls”
describes some important differences between solid state equipment
and hard–wired electromechanical devices that should be taken into
consideration when applying products such as those described in this
publication.
Reproduction of the contents of this manual, in whole or in part,
without written permission of the Allen-Bradley Company is
prohibited.
Throughout this document we use notes to make you aware of safety
considerations.
!
WARNING
Identifies information about practices or
circumstances that can cause an explosion in a
hazardous environment, which may lead to personal
injury or death, property damage, or economic loss.
Attentions help you:
•
identify a hazard
•
avoid the hazard
•
recognize the consequences
!
ATTENTION
Identifies information about practices or
circumstances that may lead to personal injury or
death, property damage, or economic loss.
Important User Information