Rockwell Automation 1785-L20C_L40C, D17856.5.14 ControlNet PLC-5 Programmable Controllers User Manual User Manual
Page 103
Index
I–7
disposing of the battery,
handling the processor,
identifying the components of the
processor,
installing a DH+ link,
installing a remote I/O link,
installing keying bands for the processor,
installing the battery,
installing the processor in the chassis,
locating additional information,
preparing for,
removing the processor from the chassis,
selecting cables
ControlNet cables,
DH+ programming,
remote I/O,
serial,
selecting the ControlNet network
address,
selecting the DH+ station address of
Channel 1A,
setting the I/O chassis backplane
switches,
setting the I/O chassis configuration plug,
specifying the serial interface of Channel
0,
where to go,
instructions
ControlNet I/O Transfer (CIO),
how to use,
when to use,
ControlNet Immediate Data Input (IDI),
how to use,
ControlNet Immediate Data Output
(IDO),
how to use,
ControlNet Message (MSG), how to use,
Immediate Input (IIN),
Immediate Output (IOT),
Message (MSG),
how to use,
when to use,
IOT. See Immediate Output instruction
K
keyswitch, location of
on PLCĆ5/20C,
on PLCĆ5/40C,
L
ladderĆrung messaging,
link, definition of,
M
map table,
mapĆtable entries,
fields,
number required for dataĆtransfer types,
mapĆtable entry, definition of,
maximum scheduled node, definition of,
maximum unscheduled node, definition of,
memory module space,
memory modules, specifications,
memoryĆmodule space, location of
on PLCĆ5/20C,
on PLCĆ5/40C,
Message instructions,
monitoring ControlNet configuration and
status screens,
MSGs. See Message instructions
N
NAP. See Network Access Port
Network Access Port,
definition of,
network address, definition of,
Network Update Interval,
definition of,
Network Update Time,
definition of,
specifying,
node, definition of,
nonĆdiscrete I/O data transfer
definition of,
description,
nonĆdiscrete I/O data transfers, number of
mapĆtable entries required,
nonĆdiscrete I/O dataĆtransfer mapping,