Rockwell Automation 1336 8A-48A Fiber Industry User Manual

Page 53

3–13

Human Interface Module

Password Mode

and

1. The factory default password is 0 (which

disables password protection). To change
the password and enable password
protection, perform the following steps.

A. From the Status Display, press Enter

(or any key). “Choose Mode” will be
shown.

B. Press the Increment (or Decrement)

key until “Password” is displayed.

C. Press Enter.

D. Press the Increment (or Decrement)

key until “Modify” is displayed.

E. Press Enter. “Enter Password” will be

displayed.

F. Press the Increment (or Decrement)

key to scroll to your desired new
password. With a Series A (version
3.0) or Series B HIM, the SELect key
will move the cursor.

G. Press Enter to save your new pass-

word.

H. Press Enter again to return to the

Password Mode.

I. Press the Increment (or Decrement)

key until “Logout” is displayed.

J. Press Enter to log out of the Password

mode.

K. With a Series A (version 3.0) or Series

B HIM, the Password mode can be
programmed to appear when drive
power is applied. Simultaneously press
the Increment and Decrement keys
while the Password display is shown.

Sets Password Display

as Power-Up Display

Choose Mode
Password

Choose Mode
Display

Password
Modify

Enter Password
< 0>

Enter Password
< 123>

Choose Mode
Password

Password
Login

Password
Logout

Choose Mode
Password