Rockwell Automation 1336 8A-48A Fiber Industry - Manual (Page 42)

3–2 Human Interface Module
Figure 3.2
HIM Display Panel
LCD Display
Display Panel Key Descriptions
Escape
When pressed, the ESCape key will cause the
programming system to go back one level in the menu
tree.
Select
Pressing the SELect key alternately causes the top or
bottom line of the display to become active. The flashing
first character indicates which line is active.
Increment/Decrement
These keys are used to increment and
decrement a value or scroll through different
groups or parameters. Pressing both keys
simultaneously while the Process or Password
Display is shown, will save that display as the
startup display.
Enter
When pressed, a group or parameter will be selected or a
parameter value will be entered into memory. After a
parameter has been entered into memory, the top line of
the display will automatically become active, allowing
another parameter (or group) to be chosen.