Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 184)

184 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Appendix C EtherNet/IP Objects (Adapter mode only)
2 Get Configuration Capability UDINT Bit | Value (0 = False, 1 = True)
0 = Supports BOOTP
1 = DNS Client (able to resolve host names by query
to DNS server)
2 = DHCP Client (able to obtain network
configuration through DHCP)
3 = DHCP-DNS Update (able to send its host name in
the DHCP request)
4 = Configuration Settable (able to set the network
configuration via TCP/IP object)
5 = Hardware Configurable (able to set the network
configuration via the Node Address switches)
6 = Configuration change requires reset
7 = Address Conflict Detection (ACD) capable
8…31 = Reserved
3 Set Configuration Control UDINT Bit | Value
0…3 = Startup configuration
0 = Use configuration saved in NVS
1 = Obtain configuration via BOOTP
2 = Obtain configuration via DHCP
3…15 = Reserved
4 = DNS Enabled (resolves host names by query to
DNS server)
5…31 = Reserved
4 Get Physical Link Object STRUCT of:
UINT
Padded EPATH Path size
Path
5 Get Interface Configuration STRUCT of:
UDINT
UDINT
UDINT
UDINT
UDINT
STRING Option module IP address
Option module subnet mask
Option module gateway address
Primary name server
Secondary name server
Default domain name
6 Get Host Name STRING Host name when using DHCP
10 Set Select ACD BOOL Activates the use of ACD
11 Set Last Conflict Detected STRUCT of:
USINT
USINT[6]
USINT[28] ACD Activity
Remote MAC
ARP PDU
Attribute ID Access Rule Name Data Type Description