Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 119)

Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012 119
Troubleshooting Chapter 7
27 DL To Net 01 Val The present value of respective Host DL To Net xx parameter being received from the drive by this option
module. (If not using a Datalink, its respective value should be zero.)
28 DL To Net 02 Val
29 DL To Net 03 Val
30 DL To Net 04 Val
31 DL To Net 05 Val
32 DL To Net 06 Val
33 DL To Net 07 Val
34 DL To Net 08 Val
35 DL To Net 09 Val
36 DL To Net 10 Val
37 DL To Net 11 Val
38 DL To Net 12 Val
39 DL To Net 13 Val
40 DL To Net 14 Val
41 DL To Net 15 Val
42 DL To Net 16 Val
43 DPI Rx Errs The present value of the DPI Receive error counter.
44 DPI Rx Errs Max The maximum value (since reset) of the DPI Receive error counter.
45 DPI Tx Errs The present value of the DPI Transmit error counter.
46 DPI Tx Errs Max The maximum value (since reset) of the DPI Transmit error counter.
47 SI Primary Err Number of CRC errors detected by the option module in the primary channel (Logic Status and Feedback)
of the Serial Interface from the drive.
48 SI Secondary Err Number of CRC errors detected by the option module in the secondary channel (Datalinks) of the Serial
Interface from the drive.
49
50
51
52
53
54
HW Addr 1
HW Addr 2
HW Addr 3
HW Addr 4
HW Addr 5
HW Addr 6
Decimal value of each byte in the option module’s Ethernet hardware address.
55
56
57
58
IP Addr Act 1
IP Addr Act 2
IP Addr Act 3
IP Addr Act 4
Value of each byte in the option module’s present IP address. A value of “0” appears if the option module
does not currently have an IP address.
Table 10 - Adapter Mode Diagnostic Items (Continued)
No. Name Description
255 : 255 : 255 : 255 : 255 : 255
[HW Addr 1]
[HW Addr 2]
[HW Addr 3]
[HW Addr 4]
HW Addr 5]
[HW Addr 6]
255 . 255 . 255 . 255
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]