SATEC PM130 PLUS Manual - Manual (Page 16)

‎Chapter 1 General I N F O R M A T I O N Measured P A R A M E T E R S
16 PM130 PLUS Powermeter Series
Display Options
Different display options are available for customization to be used in dark
or non-safe locations, or in places that are hardly accessible for
observation. See
Configuring the Display in Chapter 5 for more
information.
1.4 Measured Parameters
Table 1: Measured and Displayed Parameters
Parameter Display Comm. Analog Pulse Alarm
1-cycle Real-time Measurements
RMS Voltage per phase   
RMS Current per phase   
kW per phase  
kvar per phase  
kVA per phase  
Power Factor per phase  
Total kW   
Total kvar   
Total kVA   
Frequency   
Neutral Current   
Total Power Factor   
Voltage & Current unbalance  
1-sec Average Measurements
RMS Voltage per phase    
RMS Current per phase    
kW per phase   
kvar per phase   
kVA per phase   
Power Factor per phase   
Total kW    
Total kvar    
Total kVA    
Total Power Factor    
Frequency    
Neutral Current    
Voltage & Current unbalance   
Amps & Volt Demands
Ampere & Volt Demand per phase  
Ampere Maximum Demand per phase   
Voltage Maximum Demand per phase   
Power Demands E, EH
kW Accumulated Demand Import & Export   
kvar Accumulated Demand Import & Export   
kVA Accumulated Demand   
kW Demand Import & Export  
kvar Demand Import & Export  
kVA Demand  
kW Sliding Demand Import & Export  
kvar Sliding Demand Import & Export  
kVA Sliding Demand  