MTS Series 793 - Manual (Page 2)

MTS Series 793 Tuning and Calibration 2
Copyright information © 2006–2009 MTS Systems Corporation. All rights reserved.
Trademark information
MTS, FlexTest, Temposonics, and TestWare are registered trademarks of MTS
Systems Corporation; MPT, Station Builder, Station Manager, and TestStar are
trademarks of MTS Systems Corporation within the United States. These
trademarks may be protected in other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation. All
other trademarks or service marks are property of their respective owners.
Proprietary information
Software use and license is governed by MTS’s End User License Agreement
which defines all rights retained by MTS and granted to the End User. All
Software is proprietary, confidential, and owned by MTS Systems Corporation
and cannot be copied, reproduced, disassembled, decompiled, reverse
engineered, or distributed without express written consent of MTS.
Software validation and
verification
MTS software is developed using established quality practices in accordance
with the requirements detailed in the ISO 9001 standards. Because MTS-
authored software is delivered in binary format, it is not user accessible. This
software will not change over time. Many releases are written to be backwards
compatible, creating another form of verification.
The status and validity of MTS’s operating software is also checked during
system verification and routine calibration of MTS hardware. These controlled
calibration processes compare the final test results after statistical analysis
against the predicted response of the calibration standards. With these established
methods, MTS assures its customers that MTS products meet MTS’s exacting
quality standards when initially installed and will continue to perform as intended
over time.
Publication information
M ANUAL P ART N UMBER P UBLICATION D ATE MTS 793 S OFTWARE R ELEASE
100-147-134 A June 2006 Version 4.0A or later
100-147-134 B October 2006 Version 4.0B or later
100-147-134 C January 2008 Version 5.0B or later
100-147-134 D September 2008 Version 5.1A or later
100-147-134 E August 2009 Version 5.2A or later