beautypg.com

Parameter data transfer – Lenze EMF2133IB User Manual

Page 86

background image

Parameter data transfer

Lenze parameter sets
Parameter sets for Drive PLC and ECSxS / ECSxA axis modules

8

l

86

EDSMF2133IB EN 5.0

8.1.4

Parameter sets for Drive PLC and ECSxS / ECSxA axis modules

The Drive PLC and ECSxS / ECSxA axis modules each have a parameter set for storage in the
EEPROM. Another parameter set is stored in the main memory. This parameter set is called
"current" parameter set.

Addressing

l

Only the current parameter set can be directly addressed via the bus.

l

After switch−on, parameter set 1 is automatically loaded in the current parameter set.

)

Note!

Changes within the current parameter set are lost after the controller is
switched off.
Code C0003 serves to save the current parameter set (see documentation of
the controller).

See also other documents in the category Lenze Hardware: