Lenze EMF2133IB - Manual (Page 14)

Product description
Product features
3
l
14 EDSMF2133IB EN 5.0
3.3 Product features
ƒ Interface module for the PROFIBUS communication system with the
PROFIBUS−DP−V0 (DRIVECOM profile) and PROFIBUS−DP−V1 (PROFIdrive)
communication profiles
ƒ Drive profiles:
– DRIVECOM profile "drive technology 20" (can be switched off)
– PROFIdrive (can be switched off, state machine and PROFIdrive parameter data
channel)
ƒ Support of the I&M0 functionality for identifying the standard device
ƒ Automatic detection of the baud rate (9.6 kbps ... 12 Mbps)
ƒ Optionally up to 12 process data words (depending on the basic device)
ƒ Acyclic parameter access via DP−V1
ƒ Access to all Lenze parameters
ƒ External 24V supply for maintaining the PROFIBUS network if the standard device
fails
ƒ DIP switches for ...
– Setting of the node address
– Setting of the compatibility to the Lenze PROFIBUS communication module
EMF2131IB
ƒ LED status displays:
– Voltage supply of the communication module
– Connection from the communication module to the PROFIBUS network
– Connection from the communication module to the standard device
– Operating statuses of the standard device