Lenze EMF2133IB - Manual (Page 109)

Parameter data transfer
PROFIdrive parameter data channel
Error codes (PROFIdrive)
8
l
109 EDSMF2133IB EN 5.0
8.3.2 Error codes (PROFIdrive)
Error code Meaning Description Additional
info
0x0000 Impermissible parameter
number Access to unavailable parameter −
0x0001 Parameter value cannot
be changed Change access to a parameter value that cannot be
changed Subindex
0x0002 Low or high limit
exceeded Change access with value outside the value limits Subindex
0x0003 Faulty subindex Access to unavailable subindex Subindex
0x0004 No array Access with subindex to non−indexed parameter −
0x0005 Incorrect data type Change access with value that does not match the
data type of the parameter −
0x0006 Setting not permitted
(can only be reset) Change access with value unequal to 0 where this is
not permitted Subindex
0x0007 Description element
cannot be changed Change access to a description element that cannot
be changed Subindex
0x0008 Reserved (PROFIdrive profile V2: PPO−write requested in IR not
available) −
0x0009 No description data
available Access to unavailable description (parameter value is
available) −
0x000A Reserved (PROFIdrive profile V2: Access group wrong) −
0x000B No operation priority Change access without rights to change parameters −
0x000C Reserved (PROFIdrive profile V2: Wrong password) −
0x000D Reserved (PROFIdrive profile V2: Text cannot be read in cyclic
data transfer) −
0x000E Reserved (PROFIdrive profile V2: Name cannot be read in cyclic
data transfer) −
0x000F No text array available Access to text array that is not available (parameter
value is available) −
0x0010 Reserved (PROFIdrive profile V2: No PPO−write) −
0x0011 Request cannot be
executed because of
operating status Access is temporarily not possible for reasons that
are not specified in detail −
0x0012 Reserved (PROFIdrive profile V2: Other error) −
0x0013 Reserved (PROFIdrive profile V2: Data cannot be read in cyclic
interchange) −
0x0014 Value impermissible Change access with a value that is within the value
limits but is not permissible for other long−term
reasons (parameter with defined single values) Subindex
0x0015 Response too long The length of the current response exceeds the
maximum transmittable length
0x0016 Parameter address
impermissible Illegal value or value which is not supported for the
attribute, number of subindexes, parameter number
or subindex or combination
0x0017 Illegal format Write request: Illegal format or format of the
parameter data which is not supported
0x0018 Number of values not
consistent Write request: Number of values of the parameter
data do not match the number of subindexes in the
parameter address
0x0019
...
0x0064 Reserved − −
0x0065
...
0x00FF Manufacturer−specific − −