Lenze EMF2133IB - Manual (Page 33)

Commissioning
Initial switch−on
6
l
33 EDSMF2133IB EN 5.0
Detailed
information Procedure Step
11. It is now possible to communicate with the controller, i.e.
l exchange process data (setpoints and actual values);
l read all codes;
l change all codes that can be written.
See the attribute table or code description of the corresponding standard
device.
Response
The yellow LED on the communication module is blinking when the PROFIBUS
is active.
12. Enable standard device via terminal. Documentation of
the standard device