Lenze EMF2133IB - Manual (Page 5)

About this documentation 1
l
5 EDSMF2133IB EN 5.0
0Fig. 0Tab. 0
1 About this documentation
Contents
This documentation only contains descriptions for the EMF2133IB communication
module (PROFIBUS−DP).
)
Note!
This documentation supplements the mounting instructions supplied with the
communication module and the documentations for the standard devices
used.
The mounting instructions contain safety instructions which must be
observed!
ƒ The features and functions of the communication module are described in detail.
ƒ Examples illustrate typical applications.
ƒ Furthermore this documentation contains the following:
– Safety instructions that must be observed.
– Key technical data relating to the communication module
– Information on versions of Lenze standard devices to be used.
– Notes on troubleshooting and fault elimination
The theoretical correlations are only explained in so far as they are necessary for
comprehending the function of the function module.
This documentation does not describe the software of an original equipment
manufacturer. No responsibility is taken for corresponding information given in this
manual. Information on how to use the software can be obtained from the documents of
the host system (master).
All brand names mentioned in this manual are trademarks of their respective companies.
Validity information
The information given in this documentation is valid for the following devices:
Communication module Type designation From hardware version From software version
PROFIBUS−DP EMF2133IB V2 0x
Target group
This documentation is intended for all persons who plan, install, commission and maintain
the networking and remote service of a machine.
I
Tip!
Information and auxiliary devices around the Lenze products can be found in
the download area at
http://www.Lenze.com