Leica Biosystems CV5030 - Manual (Page 58)

58 Instructions for Use V 3.0 RevE – 04/2013
5. Operation
Mountant Stroke – stroke length of the coverslip mountant
Mountant Volume - volume of the coverslip mountant
The opening time for the dispenser valve is set in
increments of 1:
Label field
stroke length
The quantity and stroke length of the coverslip
mountant is adapted to the cover slip length.
Fig. 36
Adjustment options for the opening time:
In increments of 1 from 1 (short) to 9 (long).
1 = less coverslip mountant to 9 = maximum quantity of coverslip mountant
The quantity of the coverslip mountant applied also depends on the composition of the mountant
(e.g. viscosity) and the selected dispenser needle (different diameters).
р
р
Mountant Stroke: 40 = 40 mm
Cover slip length
Mountant Stroke: 50 = 50 mm
Cover slip length
Mountant Stroke: 55 = 55 mm
Cover slip length
Mountant Stroke: 60 = 60 mm
Cover slip length
5.10 Menu A – parameter settings (continued)