Instrument setup – Leica Biosystems CV5030 User Manual
Page 27

27
Leica CV5030 – Robotic Coverslipper
4. Instrument Setup
4.7.2. Setting the needle height
Fig. 15
39
35
The needle height has to be corrected after rein-
serting the dispenser needle.
Setting the needle height:
• Reset the dispenser (35) from the working
position (
see Fig. 16,
57) to the rest position
(
see Fig. 15,
39).
• There is a screw (
see Fig. 16
, 54) in the work-
ing position. This determines the distance
between the dispenser needle and specimen
slide.
• The height of the dispenser can be changed
by rotating the screw using a No. 3 Allen key
(56) (standard delivery):
-
Rotating clockwise decreases the dis-
tance.
-
Rotating counterclockwise increases the
distance.
• Keep rotating the screw clockwise until the
dispenser needle is touching the highest point
of the specimen slide outfeed (
see Fig. 14,
55)
(distance = 0 mm). This can be checked by
putting the dispenser into the working position.
Fig. 16
57
56
54
- SM2010 R (46 pages)
- CM305 S (66 pages)
- CE Knife holder (14 pages)
- CM1950 (78 pages)
- VT1200/VT1200 S (62 pages)
- VT1000 S (42 pages)
- HI1220 (18 pages)
- HI1210 (18 pages)
- CM1850 UV (56 pages)
- CM1850 UV (54 pages)
- CM1510-S (56 pages)
- CM3600 XP (114 pages)
- CM1100 (36 pages)
- CM1860/CM1860 UV (98 pages)
- Premium blade holder (14 pages)
- CM1520 (92 pages)
- VT1000 A (49 pages)
- VT1000 P (48 pages)
- SP2600 (51 pages)
- SM2500 (76 pages)
- SM2400 (8 pages)
- SM2000R (22 pages)
- EG1160 (32 pages)
- EG1150 C (20 pages)
- EG1150 H (42 pages)
- EG1130 (2 pages)
- EG1120 (2 pages)
- EG F (18 pages)
- ASP300 (70 pages)
- PELORIS_PELORIS II (160 pages)
- TP1020 (102 pages)
- ASP200 S (88 pages)
- ASP300 S (88 pages)
- ASP6025 (178 pages)
- LN22 (44 pages)
- RM CoolClamp (20 pages)
- RM2265 (88 pages)
- RM2255 (82 pages)
- RM2245 (78 pages)
- RM2235 (78 pages)
- RM2125 RTS (60 pages)
- SP9000 (30 pages)
- SP1600 (10 pages)
- ST4040 (50 pages)
- ST5020 (88 pages)