Dascom 7010 Programmers Manual DMX - Manual (Page 70)

1-68
Setting previous field to character-string-replacement-mode field
Code U
Function Changes previous field to character-string-replacement-mode field,
i.e., prepares replacement for only changing data. This command is
not used when label is totally reconstructed.
Caution Register length is set according to the length of data for generating
character string. Therefore, lengths of data for old and new character
strings must be the same.
Example The following shows the use of character-string-replacement-mode
field.
Input data [02] n Sets units to inch
[02] L [0D] Starts label format mode
D22 Sets pixel size
161100000100060ABC Sets character data "ABC" with
system font 6
161100001100060SUNDAY Sets character data "SUNDAY" with
system font 6
U Sets
character-string-replacement-mode
field
X Ends label format mode
[02] U02MONDAY Replaces character data "SUNDAY"
with "MONDAY"
[02] G
Completion of setting printing contents (field preparation)
Code X
Function Completes printing contents setting, switches command interpreter
into system level interpreter, and system level command is valid.
Caution Printer waits for label format command input until it receives the
commands such as E and X, so printer cannot advance to the next
operation.