Dascom 7010 Programmers Manual DMX - Manual (Page 55)

1-53
Set format attribute
Code An
Setting n 1, 2, 3, 5
1 : All data should be formed by XOR processing
In this mode, the area where text strings, images or barcodes
intersect will not be printed.
2 : All data should be formed by OR processing.
In this mode, the area where text strings, images or barcodes
intersect will be printed.
3 : Following data should be formed by overlay processing
* Human readable character and barcode
* Image and drawing data
In this mode, first text format is covered by the text formatted
last.
5 : Following data should be printed in reverse.
* Human readable character and barcode
* Image data
Note: Reversed data should be formed by XOR processing.
Other data should be formed by XOR processing.
Function Specifies development method for character and bar code.
Set format attribute
Code [1B] B n 1B is hex code.
Setting n 0, 1 Initialization value: 0
0 Specifies XOR development and character and bar code overlaid
are reversed out of black.
1 Specifies OR development and character and bar code are
overlaid.
Function Specifies development method for character and bar code.