Dascom 7010 Programmers Manual DMX - Manual (Page 49)

1-47
Printing printer status
Code [02] Z
Function Performs test printing for indicating printer status.
Select Command Set
Code
Setting
[02] [1B] G n
n 0, 1,2
0 : DMI or DMW
1 : DM4 or DM8
2 : DPP
Function Selects proper command set for your application.
Caution Switching command sets will change the designated destination of
memory module and paper position. Check the command set if
something is wrong with the destination and location of files.
Example Shown below are examples of input data when command set is DMI
(DMW) or DPP.
Input data [02][1B]G0 When command set DMI(DMW)is specified.
[02][1B]G2 When command set DPP is specified.