Dascom 7010 Programmers Manual DMX - Manual (Page 47)

1-45
Clearing memory module contents (in file units)
Code [02] xntname
m Memory module specification parameter
Allocation of modules varies with command settings. Refer to the table
below.
Command Set
Allocation of module DMI / DMW DM4 / DM8 DPP
on-board S D-RAM D A B
on-board flash
memory
G B A
PCMCIA Card
(option)
E or F E or F E or F
Current memory
module
on-board
SD-RAM
on-board
SD-RAM
on-board
SD-RAM
Transmission
data
T File format
F Download font
G Graphics data
L Label format
S TrueType font
Name File name (up to 16 characters ending with CR)
Bit mapped download font ID is three digits and TrueType
download font ID is two digits.
Function The data in a memory module is cleared per file.
Example The graphic image file "MARK8" which exists in Module B is cleared.
Input data [02] xBGMARK8 [0D]