Dascom 7010 Programmers Manual DMX - Manual (Page 122)

1-120
3.4 Type of Graphic Image Data
The data to be stored in the on-board memory or memory module with the
command "I(A/B/C)faa..a" above are as follows:
1 7-bit image loading file data
Without header
Data in ASCII codes
2 8-bit image format data (image saved in reverse)
With header
Data in hex codes
3 8-bit image format data (image saved in normal)
With header
Data in hex codes
4 PCX format data (saved in normal)
5 PCX format data (saved in reverse)
6 BMP format data (saved in normal)
7 BMP format data (saved in reverse)
For details, refer to 4.6 Graphic Printing in Chapter 4 Printing
Command Examples.