Dascom 7010 Programmers Manual DMX - Manual (Page 50)

1-48
Setting Printing Method
Code [02] [1B] Mn
Setting n T , D
T : Thermal transfer
D : Heat-sensitive
Function Designates the printing method to be set; thermal transfer mode
where a ribbon is used, or heat-sensitive mode where heat-sensitive
paper is used.
Example Shown below are examples of input data when printing in thermal
transfer mode.
Input data
[02] n Sets units to inch
[02][1B] MT Sets printing method to thermal transfer
mode.
[02] L Starts label format mode
D22 Sets pixel size
191101001000050ABC Sets character data "ABC" with smooth
font 48pt
E Ends label format mode and prints
ABC
Direction of feed
Head disconnection detection
Code [02] [1B] T
Function Measures resistance value per dot on head heat-generation part and
checks whether head heat-generation part (resistance value) is
normal. If it is normal, [01] is transmitted to the computer and if it is
abnormal, [00] is transmitted to the computer.
Caution The [0D] hex code is not added to the end of the transmission data.