Dascom 7010 Programmers Manual DMX - Manual (Page 46)

1-44
Default module selection
Code [02] X a
a Default module selection
Allocation of modules varies with command settings. Refer to the table
below.
Command Set
Allocation of module DMI / DMW DM4 / DM8 DPP
on-board S D-RAM D A B
on-board flash
memory
G B A
PCMCIA Card
(option)
E or F E or F E or F
Setting
Current memory
module
on-board
SD-RAM
on-board
SD-RAM
on-board
SD-RAM
Function Selects default module. If default is set with other command module
parameter, the module selected with this command is used. (E.g., [02]
Imfaa, [02] qn, snaa..a, etc.)
Example Input data below represents that default module A is selected and
default module is cleared.
Input data [02] X A Selects default module A.
[02] q C Clears default module.