Dascom 7010 Programmers Manual DMX - Manual (Page 43)

1-41
Rewriting specified format register contents
Code [02] U nnaa..
Setting nn 2-digit format register numbers 01 - 99
Printer sets format register numbers in sequence when label
format is executed.
aa Input character string data ending with CR code (0D hex) instead
of old data. Basically the number of characters must be the same
as the old data. But if it is small, rewriting can be executed.
Function Changes some part of the formerly printed label format or formatted
label contents and prints it again.
Example Input data below represents that data "0001" and "ABC" are set on the
fields No. 01 and No. 02 respectively and label is printed and then with
this command, the data contents of the fields No. 01 and No. 02 are
changed to "9999" and "GHIJK" and printed.
Input data [02] n Sets units to inch
[02] L Starts label format mode
D11 Sets pixel size
1611000000000500001 Sets data "0001" on fields No. 01
161100000300050ABCDE Sets data "ABCDE" on fields No. 02
E Ends label format mode and prints
[02] U019999 Changes data on fields No. 01 to "9999"
[02] U02GHIJK Changes data on fields No. 02 to
"GHIJK"
[02] G Prints edited format
Direction of feed
9999
GHIJK
0001
ABCDE