Dascom 7010 Programmers Manual DMX - Manual (Page 66)

1-64
Calling label format
Code r aa..a
Setting aa..a Maximum 16 characters of format name ending with CR
code
Function Calls label format stored in the memory module. Storing of label
format into memory module is executed with "s" command.
Caution Priority for calling module
(1) Default (module C) or STX + Xa setting module
(2) Modules other than above
Example Input data below represents that label format data is stored in the
RAM by using "NAME" and label format is ended once, then put in
again and file name "NAME" in the RAM is called and those data
together with the current label format data are printed.
Input data [02] n Sets units to inch
[02] L Starts label format mode
D11 Sets pixel size
190000700500050PRINTER Sets data "PRINTER" with
smooth font 24pt
sANAME Stores label format name
"NAME" in on-board RAM and
ends label format mode
[02] L Starts label format mode
rNAME Reads out label format "NAME"
data
D11 Sets pixel size
190000700800050LABEL Sets data "LABEL" with smooth
font 24pt
E Ends label format mode and
prints
PRINTER
Readout label format data
Direction of feed
LABEL