JLG 4017PS Service Manual - Manual (Page 162)

Electrical System
9-4 3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7
9.2 SPECIFICATIONS
Electrical system specifications are listed in Section 2,
“General Information and Specifications.”
9.3 SAFETY INFORMATION
9.4 KEYPAD AND DISPLAY SCREEN
9.4.1 Keypad
Depress the C and OK buttons on the keypad to access
the menu.
1. C (Clear or Escape): Use in conjunction with display
screen. Returns user interface one level during
navigation. If at top of the menu, depress and hold
for one second to exit.
2. Up/Down Arrows: Use in conjunction with display
screen. Navigate menu selections and change
adjustable values.
3. OK (Enter): Use in conjunction with display screen.
Confirms user interface inputs.
9.4.2 Display Screen
The display screen is located in the center of the
instrument panel and can display the following
information with activation of the menu screen.
a. Help - Displays active fault code. Depress OK button
again and use keypad arrows to cycle through the
last 25 fault codes. Active fault codes are denoted
with an asterisk. Refer to Section 9.18.2, “Machine
Fault Codes,” for the complete list of codes.
b. Operator Tools - Speed, Temperature and Oil
Pressure units and Steer Mode can be modified by
the operator. Customer Service level access code is
required to view other items.
c. Personalities - Customer or Service level access
code required.
d. Access Level - Code entry determines access level.
• Operator (Level 3) - No code required.
• Customer (Level 2) - Refer to Section 9.5,
“Software Level 2 Accessibility.”
• Service (Level 1) - Manufacturer service
representative only.
e. Diagnostics - View diagnostic information.
f. System Test - Performs test of all system inputs and
outputs.
g. Machine Setup - Service level access code required.
h. Calibrations - Customer or Service level access code
required.
WARNING
DO NOT service the machine without following all
safety precautions as outlined in Section 1, “Safety
Practices,” of this manual.
OAM2600
1 2 3
OAM2610
MENU:
HELP: PRESS ENTER