Black Box COMPACT T1 MT850A - Manual (Page 68)

4-6 Compact T1 - Release 6.1
Configuration
Basic System Setup
Set Up a DS0/Channel
Use the following commands to set up a DS0. See the set (ds0) command for details.
Set Up an Analog Port
Use the following commands to set up an analog port.
Command Description
set {slot:port:channel} up Activate the channel
set {slot:port:channel} signal
{ls|gs|emw|emdw|emicpd|dpt}
Set the signaling option for the channel
set {slot:port:channel} type
{data|voice}
Set the channel type
Command Description
set {slot:port} up Activate the port. See set (ds1) command
for details
set {slot:port} signal
{dpt|gs|gsrb|gsw|gswrb|ls|
lscpd|lsrb}
Set the signaling option for the port. See the
set (fxs5G) or set (fxo) command for details
set {slot:port} rxgain {n} Set the receive gain/loss in dB. See the set
(fxs5G) or set (fxo) command for details
set {slot:port} txgain {n} Set the transmit gain/loss in dB. See the set
(fxs5G) or set (fxo) command for details