Black Box COMPACT T1 MT850A - Manual (Page 255)

Compact T1 - Release 6.1 5-171
CLI Commands
set
set (router-voice) default
Use the set (router-voice) default command to reset all CLI accessible options for one or more
CMG voice channels to their defaults. Defaults are set for algorithm preference, compander,
echo cancellation, echo tail, endpoint prefix, endpoint suffix, silence suppression and TOS. This
command applies to the CMG Router card only.
Syntax: set {cmg_voice-addr} default
Example: set 2:1:1:1-4 default
The example will reset voice channel provisioning to defaults for voice
channels 1-4 on the CMG card in slot 2.
{cmg_voice-addr}
In the form {slot:voip:port}
slot The slot number (1-6) that contains the CMG card.
voip To designate VoIP 1:1 is used.
channel Channel number for the router is 1-48, range or all