Black Box COMPACT T1 MT850A - Manual (Page 198)

5-114 Compact T1 - Release 6.1
CLI Commands
set
set (router) mgcp dialstring format
The set (router) mgcp dialstring format is an interoperability command to specify the
reporting format of dialed digit strings in the Observed Events parameter of MGCP NTFY
messages. Either the individual digits are separated by commas or not. The default, which
is the recommended usage, is to separate digits with commas. This command applies to the
CMG Router card only. Note: The set (router) mgcp package default command also affects
the dialstring format. See description below.
Syntax: set {cmg_card-addr} mgcp dialstring format
{commas|nocommas}
Example: set 1 mgcp dialstring format commas
The example will set the MGCP dialstring format to separate the digits with
commas, for the CMG in slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{commas|nocommas}
commas Insert commas between digit events (Default)
nocommas Do not insert commas between digit events