Black Box COMPACT T1 MT850A - Manual (Page 315)

Compact T1 - Release 6.1 5-231
CLI Commands
show
show (router-lan)
The show (router-lan) command displays the settings for the Router card.
Syntax: show {rtr-addr}
Example: show 4:1
> show 4:1
SLOT 4:
Settings for RTR LAN 1:
Profile Name: LocalAdit
Up/Down: UP
Proxy: Disabled
Physical link: Automatic
MAC Address: 00:E0:97:01:E3:A2
IP Settings:
IP Address and Mask: 192.168.3.193 255.255.255.0
Default Router: 192.168.3.202
Enabled Frame Types: Ethernet II
RIP Direction: Send
Secondary IP Addresses and Masks:
192.168.1.1 255.255.255.0
IPX Settings:
Enabled Frame Types: None
RIP Direction: Send
802.2 Ext. Network: 00000000
Eth II Ext. Network: 00000000
SNAP Ext. Network: 00000000
802.3 Ext. Network: 00000000
Other Settings:
Enabled Frame Types: None
LAN Collision Threshold Settings for LocalAdit:
Sample Interval: 10
Collision High Threshold: 500
Collision Low Threshold: 10
LAN Spanning Tree Protocol Settings for LocalAdit:
Spanning Tree: Disabled
Static IP Network Settings for LocalAdit:
Total: 0