Black Box COMPACT T1 MT850A - Manual (Page 135)

Compact T1 - Release 6.1 5-51
CLI Commands
delete
delete (router-wan) gre network
Use the delete (router-wan) gre network command to delete a "by network" GRE tunnel to a
WAN.
Syntax: delete {rtr_card-addr} {"wan-name"} gre network
{ip-addr mask|ip-addr/bits}
Example: delete 3 "LosAngeles" gre network 10.0.0.0/8
The example will delete the "LosAngeles" GRE tunnel on 10.0.0.0/8.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{ip-addr mask|ip-addr/bits}
ip-addr mask The IP address and the subnet mask of the IP network to tunnel, each
in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
ip-addr The IP Address of the IP network to tunnel, in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255.
bits The subnet mask, specified as the number of ones bits in the mask
value. Range is between 1-32.