Black Box COMPACT T1 MT850A - Manual (Page 322)

5-238 Compact T1 - Release 6.1
CLI Commands
show
show (router-lan) static mac address
The show (router-lan) static mac address command displays the current list of static
MAC address entries for the LAN on the specified Router card.
Syntax: show {rtr-addr} static mac address
Example: show 5:1 static mac address
SLOT 5:
Static MAC Address Settings for Adit50:
Device Name MAC Address
Adit 66 00:E0:97:00:E9:CD
Total: 1
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
show (router-lan) stp
The show (router-lan) stp command displays the current Spanning Tree Protocol settings for
the specified LAN interface.
Syntax: show {rtr-addr} stp
Example: show 5:1 stp
SLOT 5:
LAN Spanning Tree Protocol Settings for Adit1:
Spanning Tree: Disabled
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot Slot number (1-6) that contains the Router card.
port Port number of the Router is 1.
"profile-name" Profile name for the Router interface used to reach this destination.
Name must be enclosed in quotes, with a maximum of 11 characters.
slot Slot number (1-6) that contains the Router card.
port Port number of the Router is 1.
"profile-name" Profile name for the Router interface used to reach this destination.
Name must be enclosed in quotes, with a maximum of 11 characters.