Black Box COMPACT T1 MT850A - Manual (Page 321)

Compact T1 - Release 6.1 5-237
CLI Commands
show
show (router-lan) static ip network
The show (router-lan) static ip network command displays the current list of static IP
network entries for the LAN on the specified Router card.
Syntax: show {rtr-addr} static ip network
Example: show 5:1 static ip network
SLOT 5:
Static IP Network Settings for Adit50:
Network Subnet Mask Metric Next Gateway
100.0.0.0 255.0.0.0 1 192.136.43.52
Total: 1
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
show (router-lan) static ipx network
The show (router-lan) static ipx network command displays the current list of static IPX
network entries for the LAN on the specified Router card.
Syntax: show {rtr-addr} static ipx network
Example: show 5:1 static ipx network
SLOT 5:
Static IPX Network Settings for Adit50:
Total: 0
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot Slot number (1-6) that contains the Router card.
port Port number of the Router is 1.
"profile-name" Profile name for the Router interface used to reach this destination.
Name must be enclosed in quotes, with a maximum of 11 characters.
slot Slot number (1-6) that contains the Router card.
port Port number of the Router is 1.
"profile-name" Profile name for the Router interface used to reach this destination.
Name must be enclosed in quotes, with a maximum of 11 characters.