Black Box COMPACT T1 MT850A - Manual (Page 263)

Compact T1 - Release 6.1 5-179
CLI Commands
set
set (router-voice) silence
Use the set (router-voice) silence command to enable or disable silence suppression as the
default for voice calls for one or more voice channels. The new default set by this command
may be overridden on a call-by-call basis by the MGCP call agent. At the end of a call, the
configured default is back in-force. Silence suppression may not apply to certain voice
compression algorithm types. This command applies to the CMG Router card only.
Syntax: set {cmg_voice-addr} silence {disable|enable}
Example: set 2:1:1:all silence enable
The example will enable silence suppression as the default for all voice calls for
all voice channels on the CMG card in slot 2.
{cmg_voice-addr}
In the form {slot:voip:port}
{disable|enable}
slot The slot number (1-6) that contains the CMG card.
voip To designate VoIP 1:1 is used.
channel Channel number for the router is 1-48, range or all
disable Do not use silence suppression unless overridden by the call agent (Default)
enable Use silence suppression if possible and not overridden by the call agent