Delete (router-wan) nat bypass, Delete (router-wan) nat bypass -52 – Black Box COMPACT T1 MT850A User Manual

Page 136

5-52

Compact T1 - Release 6.1

CLI Commands

delete

delete (router-wan) nat bypass

Use the delete (router-wan) nat bypass command to delete an IP subnet or host from the list
of the source addresses that will not be subject to NAT Translation when passing through a NAT
enabled WAN interface. This command applies to the IP Router only.

Syntax:

delete {rtr_card-addr} {"wan-name"} nat bypass

{ip-addr}

Example:

delete 1 "RemoteUnit" nat bypass 156.65.0.0

The example will delete the NAT bypass record for the IP Address 156.65.0.0
from the WAN interface named "RemoteUnit" on the router card in slot 1.

{rtr_card-addr}

The slot number (1-6) that contains the IP Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{ip-addr}

IP address or host to delete, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.