Black Box COMPACT T1 MT850A - Manual (Page 369)

Compact T1 - Release 6.1 5-285
CLI Commands
telnet
telnet
telnet (router)
Use the telnet (router) command to establish a Telnet session from the Compact T1 CLI to the
Router card menu-driven user interface.
Syntax: telnet {rtr-addr}
Example: telnet 1
The example will Telnet into a Router in Slot 1.
> telnet 3
Connected.
Escape character is ’^]’.
Attempting Router connection...
Router [Wed Apr 24, 2002 13:00:15] ( to login)
Password >******
Select a terminal type...
( or to toggle, to accept)
Terminal:
{rtr-addr}
The Router address is in the form {slot|slot:port}.
slot Slot location (1 - 6) of a Router (IP or CMG) card.
port Port number of a Router is 1. Note: only required on IP Router when
release 1.1 or earlier.