Black Box COMPACT T1 MT850A - Manual (Page 364)

5-280 Compact T1 - Release 6.1
CLI Commands
status
status (router-voice)
Use the status (router-voice) command to display the status of service, calls, signaling,
connections, call agent communications and telephony statistics for a CMG router voice
channel. This command applies to the CMG Router card only.
Syntax: status {cmg_voice-addr}
Example: status 5:1:1:3
CMG VoIP CHANNEL REPORT Slot-5
VoIP Channel 3:
Endpoint ID: aaln/3
Admin State: Normal
Oper State: Normal
Call State: Call In Progress
Call Direction: Incoming
Signaling Status:
Hookswitch State: Off Hook
Last Events Requested: L/hd(N)
Current Digit Map:
x.[#T]
Call/Connection Status for Connection ID 1:
Leg # In Conference: 0
Call ID: 1
Caller ID Number:
Caller ID Name:
RTP Payload Type: 0
Connection Mode: Receive Only
Local RTP Socket: 192.168.24.193:30000
Remote RTP Socket: 0.0.0.0:0
Algorithm In Use: None
Rx Gain 0 dB
Tx Gain 0 dB
Connection Statistics
Packets Sent: 0
Packets Rcvd: 0
Payld Octets Sent: 0
Payld Octets Rcvd: 0
Dropped Packets: 0
Jitter: 0