Black Box COMPACT T1 MT850A - Manual (Page 229)

Compact T1 - Release 6.1 5-145
CLI Commands
set
set (router) voip g729a
Use the set (router) voip g729a command to enable or disable the G.729 codec in the
CMG. This command takes effect after the card has been reset.
NOTE: The G.729 feature is protected by a software key. Until an appropriate
key is entered to enable this feature it will not be usable. The command, however,
will still succeed to allow for pre-configuration. For additional information on how to
purchase this feature, contact Customer Service.
Syntax: set {cmg_card-addr} voip g729a {disable|enable}
Example: set 3 voip g729a enable
The example will enable G.729 on the CMG card in slot 3.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{disable|enable}
disable Will prevent the use of the G.729 codec.
enable Will allow the use of the G.729 codec. Enable is the default.