Black Box COMPACT T1 MT850A - Manual (Page 201)

Compact T1 - Release 6.1 5-117
CLI Commands
set
set (router) mgcp keepalive
Use the set (router) mgcp keepalive command to configure a keep-alive timer that will
cause the CMG to resend RSIP restart messages on expiration. When enabled, this
countdown timer is reset every time an MGCP message is received from the call agent. On
expiration, the CMG will react by starting periodic transmission of a wildcard RSIP restart
MGCP message to each of the configured call agents until it is acknowledged. This
command takes effect immediately.
Syntax: set {cmg_card-addr} mgcp keepalive {disablements}
Example: set 1 mgcp keepalive 5
The example will set the MGCP keep-alive timer to 5 minutes for the CMG in
slot 1.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
{disablements}
disable Disables the MGCP keep-alive timer. Default is disable.
minutes The number of minutes for the countdown timer. Range is 0 - 255,
where 0 will also disable the timer.