Black Box COMPACT T1 MT850A - Manual (Page 179)

Compact T1 - Release 6.1 5-95
CLI Commands
set
set (router) default
Use the set (router) default command to reset the Router card to its default configuration
settings. This command will cause the Router card to perform a reboot.
Syntax: set {rtr_card-addr} default
Example: set 3 default
Do you really want to do this ? y
OK
The example will reset the Router in slot 3 to its defaults.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.