Black Box COMPACT T1 MT850A - Manual (Page 324)

5-240 Compact T1 - Release 6.1
CLI Commands
show
show (router-wan)
The show (router-wan) command displays the current configuration settings for the specified
WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"}
Example: show 5 "LosAngeles"
SLOT 5:
Settings for RTR WAN LosAngeles:
State: Enabled
IP Settings:
Mode: Route
WAN Network Updates: Never
GRE Tunneling: Disabled
IPX Settings:
Mode: Blocked
Other Settings:
Mode: Blocked
NAT Gateway: Enabled
NAT Port Numbers: Dynamic
NAT Address: Assigned by Remote
WAN PPP Authentication/Security Settings for LosAngeles:
Authentication of Remote User:
User ID: Remote Profile Name: LosAngeles
Security Server: Local
Compression: Disabled
Typical Data: Easy to Compress
WAN Trunk Setting for LosAngeles:
WAN Port Number: 1
Connection Type: PPP
WAN Spanning Tree Protocol Settings for LosAngeles:
Spanning Tree: Disabled
WAN Static IP Network Settings for LosAngeles:
Total: 0