Set (router) log, Set (router) log -105 – Black Box COMPACT T1 MT850A User Manual

Page 189

Text mode
Original mode

Compact T1 - Release 6.1

5-105

CLI Commands

set

set (router) log

Use the set (router) log command to set whether the CMG text log will continuously add new
log entries by over-writing the oldest entries, or will stop adding new log entries after the log is
full. Entering this command will cause the log to be cleared. This command applies to the CMG
Router card only.

Syntax:

set {cmg_card-addr} log {first|last} [detail]

Example:

set 5 log last detail

The example will set the log to add new entries and display the log in detail on
the Router card in slot 5.

{cmg_card-addr}

The slot number (1-6) that contains the CMG card.

{first|last}

[detail]

Will display the log entries in greater detail, which will cause less entries to fit in the log.

first

Stop adding new entries when log is full (Default)

last

Always add new entries, overwrite old entries.