Basic system setup, Initial setup, Basic system setup -4 – Black Box COMPACT T1 MT850A User Manual

Page 66: Initial setup -4

4-4

Compact T1 - Release 6.1

Configuration

Basic System Setup

Basic System Setup

Following is a quick reference to some of the common tasks in configuring the
Unit.

Initial Setup

Use the following commands for your initial setup, for further information see the
specific command listed in Chapter 5, CLI Commands .

Command

Description

set local off

Disables DIP switches.

set date {mm/dd/yyyy}

Set the date used for event logging

set time {hh:mm:ss}

Set the time used for event logging

set id {"id-name"}

Set a system ID name

set clock1 {slot:port}

internal

Set the primary clock source

set clock2 {slot:port}

internal

Set the secondary clock source

set ethernet ip address

{ip-addr} {mask}

Set the ethernet IP address, in the
conventional IP address format

set ip gateway {ip-addr}

Set the IP gateway, in the conventional IP
address format