Power indicators, Power indicators -3, Battery indicators -3 dc in indicator -3 – Toshiba Tecra 8100 User Manual
Page 87: Battery indicators, Dc in indicator
User's Manual
Power and Power-Up Modes 6-3
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Power indicators
The Main battery, Secondary battery, DC IN and Power indicators on
the system indicator panel alert you to the computer’s operating capability
and battery charge status.
Battery indicators
Check the Main battery indicator to determine the status of the main battery
and the Secondary battery indicator to determine the status of the secondary
battery. The following indicator lights indicate the battery status:
Flashing orange
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Orange
Indicates the AC adaptor is connected and
charging the battery.
Green
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does
not light.
If the battery becomes too hot while it is being charged, the charge will
stop and the battery indicator will go out. When the battery’s temperature
falls to a normal range, charge will resume. This event occurs regardless
of whether the power to the computer is on or off.
DC IN indicator
Check the DC IN indicator to determine the power status with the
AC adaptor connected:
Green
Indicates the AC adaptor is connected and
supplying proper power to the computer.
Flashing orange
Indicates a problem with the power supply. Plug
the AC adaptor into another outlet. If it still does
not operate properly, see your dealer.
No light
Under any other conditions, the indicator does
not light.