Toshiba Tecra 8100 - Manual (Page 80)

5-4 The Keyboard User's Manual
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Fn + Ctrl
Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key.
Fn + Alt
Press Fn + Alt to simulate the enhanced keyboard’s right Alt key.
Hot keys
Hotkeys (Fn + a function or cursor key) let you enable or disable certain
features of the computers.
Fn + F1
Instant security:
Press Fn + F1 to lock the keyboard and blank the
screen to prevent others from accessing your data. Also, the hard disk
motor is turned off and HDD auto off timing is set to one minute. To
restore the screen and original settings, enter the password and press
Enter
. If no password is set, press Enter or F1. See Chapter 7, TSETUP
and Passwords .
Fn + F2
Battery save mode:
Pressing Fn + F2 changes the battery save mode.
Press once to activate the function then, continue holding down Fn and
press F2 again to change to one of the three battery save modes: Full
power, low power and user setting.
If you press Fn + F2 in a Windows 95 environment, an icon panel is displayed
showing the setting. If you press Fn + F2 in a Windows 98 environment, the
Power Scheme menu is displayed. Continue holding down Fn and press F2
again to change the setting. The mode at power on depends on the current
setting. It can be changed using the Power Saver utility. See Chapter 1,
Introduction , or Chapter 7, TSETUP and Passwords .
Fn + F3
Power up mode: Pressing Fn + F3 changes the power up mode. When
you press these hotkeys, the current setting will be displayed in a window.
If you use Windows 95, you can use the System window of the Power
Saver utility. In a Windows 98 environment, use the When I press the
power button item
of the System Power Mode window in the Power
Saver utility. See Chapter 1, Introduction , or Chapter 7, TSETUP and
Passwords .