Toshiba Tecra 8100 - Manual (Page 115)

User's Manual TSETUP and Passwords 7-13
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Passwords
Three security levels are available: supervisor, user and hard disk drive.
The supervisor password is provided for system managers or others who
need to control the computer's settings. If you do not need to restrict
access to the computer's settings by other users, it is better to register
only a user password.
The following describes restrictions that apply to the user password mode
when both supervisor and user passwords are registered. They do not
apply if only the user password is registered.
User password log on
The following restrictions apply when you log on with a user password:
TSETUP No access
Hardware Setup No access
Processor Serial
Number
You cannot change the Processor Serial Number
setting if you log on with a user’s password that
is restricted from making a change to this item.
Supervisor password log on
The following restrictions apply when you log on with a supervisor password:
Instant security User password will not provide access to the
computer.
Resume Mode User password will not provide access to the
computer.
The supervisor password will provide access to the computer from instant
security or Resume mode even if the user password was used to log on to
the computer.