beautypg.com

Turning off the power, Restarting the computer – Toshiba Tecra 8100 User Manual

Page 58

background image

3-8 Getting Started

User's Manual

Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK

Turning off the power

When you have finished work, follow the steps below to turn off the power

to your computer.

1.

If you have entered data, save it to the hard disk or to a diskette.

2.

Make sure all disk activity has stopped, then remove any DVD-ROM,

CD-ROM or diskette.

Make sure the Disk, SelectBay and DVD-ROM or CD-ROM indicators are

off. If you turn off the power while a disk is being accessed, you can lose

data or damage the disk.

3.

If you are using Windows 95, click Start, then click Shut Down or
Suspend

. If you click Shut Down another dialog box will appear to let

you confirm your choice.

If you are using Windows 98, click Start and click Shut Down. From

the Shut Down menu select Shut Down or Standby.

If you are using Windows NT, point to Start and click Shut Down or
Suspend

.

Shut Down

exits all applications; Suspend and Standby saves the

screen as it is so you can continue where you left when you turn the

power back on.

It is better not to use the power switch to turn off the computer.

4.

Turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment

to let all capacitors fully discharge.

Restarting the computer

Certain conditions require that you reset the system. For example, if:

„

You change certain computer settings.

„

An error occurs and the computer does not respond to your keyboard

commands.

There are four ways to reset the computer system:

1.

Select Restart from the Windows Shut Down menu in the
Start

box.

2.

Press Ctrl + Alt + Del.

3.

If you’re experiencing a problem with a software application and the

computer does not accept keyboard input, press the reset button.

4.

Turn the power off, wait 10 to 15 seconds, then turn the power on

again by pressing the power button. (This method works only when the

computer is in boot mode.)