Connecting the ac adaptor, Connecting the ac adaptor -5 – Toshiba Tecra 8100 User Manual
Page 55
User's Manual
Getting Started 3-5
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.
The AC adaptor can be connected to any power source supplying 100 to
240 volts and 50 to 60 hertz. For details on using the AC adaptor to charge
the battery pack, refer to Chapter 6,
Use of the wrong adaptor could damage the computer. Toshiba assumes
no liability for any damage in such case. The current rating for the
computer is 4.0 amperes.
1.
Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
2.
Connect the AC adaptor’s DC output plug to the DC IN input port on
the back of the computer.
Connecting the adaptor to the computer
3.
Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.