beautypg.com

Changing values in the tsetup menu, Accepting changes and exiting system setup, Default configuration – Toshiba Tecra 8100 User Manual

Page 105

background image

User's Manual

TSETUP and Passwords 7-3

Version

1

Last Saved on 10/12/99 02:16

Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK

Changing values in the TSETUP menu

1.

Press Õ and Ö to move between the two columns. Press × and Ø to

move between items in a column.

2.

Press either the space bar or BkSp to change the value.

On either page, you can go directly to a specific group by pressing the

first letter (highlighted) of the group’s name. For example, press B to go to

the Battery group.

Accepting changes and exiting SYSTEM SETUP

1.

Press End to accept the changes you made.

If the changed item does not require the system to reboot, the

following message is displayed:

Are you sure? (Y/N)

If the changed item requires the system to reboot, the following

message is displayed:

Are you sure? (Y/N)

The changes you made will cause the system to

reboot.

2.

To make other changes, press N. Repeat the steps above.

3.

To accept the changes, press Y.

You can press Esc to quit at any time without saving changes. TSETUP

asks you to confirm that you don’t want to save your changes.

Default configuration

When you access TSETUP, the current configuration is displayed.

1.

To show the default configuration, press Home.

2.

To accept the default settings, press End and then press Y.

When you execute the default setting, the following settings are not changed:
Hard Disk Mode
Password
Write Policy