Toshiba Tecra 8100 - Manual (Page 33)

User's Manual Introduction 1-13
Version
1
Last Saved on 10/12/99 02:16
Tecra 8100 User's Manual – 8100_UK.DOC – ENGLISH – Printed on 13/12/99 as IM8100UK
SelectBay utility This utility enables hot docking of SelectBay
modules, that is, you can remove (install)
SelectBay modules while the computer is on.
There are two ways to activate this utility: Click
the Tray icon on the task bar or double-click the
Toshiba SelectBay icon in the Control Panel.
IntelliSync IntelliSync lets you copy, move and delete files or
create and delete directories on a remote
computer through either serial or parallel cables
or through infrared connection. Click Start, point
to Programs and click IntelliSync.
TSETUP An easy-to-use menu lets you customize the
configuration of your computer in a DOS
environment according to the way you work with
your computer and the peripherals you use.
Options
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
Memory expansion Two memory expansion slots are available for
installing 64 or 128 MB memory modules. The
modules are SD Random Access Memory
(SD-RAM), 144-pin, SO Dual In-line (SO-DIMM).
Main battery pack An additional main battery pack can be
purchased from your Toshiba dealer.
AC adaptor If you use your computer at more than one site
frequently, it may be convenient to purchase an
additional AC adaptor for each site so you will
not have to carry the adaptor with you.
NetDock Port
Replicator
The NetDock Port Replicator provides the ports
available on the computer, in addition to a LAN
jack, separate PS/2 mouse and PS/2 keyboard
ports, a line-out jack and two USB ports.
Expansion Station You can connect the NetDock Port Replicator to
an Expansion Station, which provides two PCI
card slots (½ and ¾ size), a 5" SelectBay and a
3.5" HDD slot. The Expansion Base’s SelectBay
accommodates the same IDE modules as the
computer. It does not accommodate a diskette
drive module. An adaptor is required to install a
2.5" HDD module in the 3.5" HDD slot.